English bond and Flemish bond are the two most common brick masonry patterns used in wall construction. A brick construction pattern with alternate courses of brick laid as stretchers and headers forms an English bond. A flemish bond is a ...
Brick Masonry
Home/Building Technology Guide/Brick Masonry/Page 2Do you need to remove the ads? Become VIP Member
Category: Brick Masonry
Brick masonry is used for construction of buildings and other structures by using brick stone, stone blocks, brick blocks with different types of masonry.
Discy Latest Articles
Standard Brick Dimensions Based on Different Codes
Brick dimensions is one of the most crucial parameters that need to be considered during the selection of bricks in order to ensure they fit with the design layout. Brick selection is decided based on the certain application in which the ...
10 Structural and Non-structural Applications of Bricks
There are innumerable applications of bricks in the field of Civil engineering. They are widely used as a structural as well as a non-structural(aesthetical) element in construction. When used as a structural member, bricks are used for the construction of ...
Kiln Burning Vs Clamp Burning of Bricks
Burning is the last stage of brick making which usually imparts hardness ad strength to the bricks. The burning of bricks should be done properly. The brick should not be over burnt as well as under burnt. In general, bricks ...
Points to Remember for Mortar in Brickwork Construction
Various grades of mortar such as M1, M2 etc. are used in brickwork construction. Lime mortar and cement mortar are two types of mortar generally used for brickwork. The properties, strength and uses of these mortars under various circumstances should ...
Common Quality Lapses in Brick Masonry Construction
Various types of defects occur in brickwork due to the adoption of low-quality materials or due to poor workmanship. These defects should be repaired and blended with the structure as soon as possible. Following are the common defects noticed in ...
Procedure of Brickwork in Masonry Construction
‘Standard specification and work procedure for brickwork in masonry construction‘ provides guidelines about quality of bricks, mortar, soaking of bricks, laying of bricks, curing, scaffolding etc. The construction of brickwork in substructure and superstructure requires quality control on various aspects ...
Mortarless Dry-Stacked Interlocking Masonry System
A mortarless dry-stacked interlocking masonry system consists of Interlocking compressed earth blocks(ICEB) or concrete interlocking blocks or fly-ash interlocking blocks that are laid dry-stacked or with minimum mortar slurry in a stretcher bond in a wall. The system of dry-stacked ...