Helix Fiber Concrete – Applications, Advantages and Specifications

🕑 Reading time: 1 minute

Helix fiber is a type of steel fiber used as concrete reinforcement . This article provides specifications, advantages and applications of helix fiber concrete.

What is Helix Fiber Concrete?

Helix is a revolutionary concrete reinforcing additive which has been thoroughly tested over the past ten years. The patented, toothpick sized, twisted fibers give concrete added strength and reduces cracking.

 

What does Helix Fibers do to Concrete?

Everyone knows that plain concrete is brittle and will crack .Since Helix is added with the other ingredients, it becomes part of the mix and is dispersed throughout the entire matrix of the concrete. Adding Helix directly to the mix allows you to eliminate rebar or wire mesh and maximizes ductility. Helix reinforced concrete continues to carry load with no loss in residual strength.

Advantages of Helix Fiber Concrete

1) The Twist in Helix Fibers

In simple terms, the twist in Helix maximizes the bond with the concrete that surrounds it.The addition of millions of Helixes into concrete results in a super strong and flexible concrete mix  

2) Easy to use

By use of Helix fiber concrete, the time consuming work of reinforcement cutting, bending and placing before concreting is not required. You just order the RMC helix fiber concrete and forget about it. Helix is completely mixed in the truck along with the other ingredients.

3) Easy mixing and placing

Mixing of Helix Fiber Concrete

Mix Design of Helix Fiber Concrete: Slump should be between 3 and 5 inches (7.6-12.7cm) at the time of Helix introduction. Helix will not ball during mixing. Truck Mixer: always add Helix as the last step. Set drum at idle speed. Pan Mixer/Drum Mixer: Helix should be added together with sand and aggregates or to freshly mixed concrete.

Placing of Helix Fibers

Helix fiber reinforced concrete may be placed using conventional methods, no special equipment is needed.

Finishing of Helix Fiber Reinforced Concrete

• Finishing with Helix reinforced concrete does not require special equipment.
• Finishing can be done by hand using metal tools or using power equipment.
• When finishing using power equipment no changes to procedure are recommended.
• A wet-cut saw may be used to cut joints.

4) Eliminate cracks, add strength with Helix " The strongest Reinforcement available for concrete. 5) Stronger and Less Expensive than all other concrete Reinforcing method.

Applications of Helix Fiber Concrete

Commercial Construction

Case Study: Slab on Grade The Problem The original design for called for a 20 cm (7.75”) thick concrete slab. The owner desired a stronger and less expensive solution.

Helix fiber Solution

Helix was added at a dosage 7 kg/m3 (15 lbs./yd3) to a reduced concrete thickness of 12 cm (4.75”) - resulting in a cost savings of 22%. The resulting slab has added strength and crack protection.

Reinforced Concrete

Steel is added to concrete to carry the load after the concrete cracks. Helix is no different. Using helix instead of rebar and mesh provides these advantages:

• Helix is thoroughly dispersed in the concrete and becomes an integral part of the mix
• Prevents chipping
• Easier to use, mixed in the truck
• No labor
• Reduced cost

Read More: Fiber Reinforced Concrete – Types, Properties & Advantages of Fiber Reinforced Concrete