🕑 Reading time: 1 minute
One of the key differences between the self-compacting concrete (SCC) and normal cement concrete (NCC) is the flowability property of SCC by it's on weight. Most of the differences shown by SCC is due to this variation of flowability from the normal concrete. Here the differences between SCC and normal concrete in terms of different fresh state properties, mix composition, and long-term properties are explained in the below section.Contents:
Difference between SCC and Normal Cement Concrete
The basic difference between self-compacting concrete and normal concrete are tabulated below.Table.1: Difference between Self-Compacting Concrete and Normal cement Concrete
| Sl.No | Self-Compacting Concrete | Normal Cement Concrete |
| 1 | Concrete has high flowability to undergo compaction by its own weight | Concrete is compacted by external means of vibration |
| 2 | High workability | Less workable mix |
| 3 | Workability gained through superplasticizers and viscosity modifying agents | Workability gained through increased moisture content |
| 4 | Addition of superplasticizer increase the bond between aggregate and cement matrix | The aggregate-cement matrix is weak |
| 5 | Water Content is Low | High Water Content |
| 6 | Fines Content – Cement and Fine aggregate is high | The fines content is less compared to SCC |
| 7 | Lower water content decreases the Bleeding | Bleeding is high |
| 8 | Increased fines content gives a homogeneous mix with less segregation issues | Segregation is higher |
| 9 | Low Viscosity due to high fines content | High Viscosity |
| 10 | SCC structures give good aesthetic finish | Aesthetic finish is not satisfactory |
| 11 | Good choice for thick reinforcement works | Normal concrete are limited in thick reinforcement areas due to external compaction difficulties. |
Fresh State Properties of SCC and Normal Cement Concrete
Following fresh state properties are used to bring the difference between SCC and NCC.- Rheological Property
- Segregation
- Bleeding
- Strength Development
- Plastic Settlement
- Plastic Shrinkage
- Creep
1. Rheological Property
The superior properties reflected by SCC is due to its better rheology. The internal microstructure is more crack free and of high strength compared to normal concrete. More about rheology is explained by the workability properties. SCC possess higher workability when compared with NCC. This is the property that enables the SCC to perform self-compaction. The workability in SCC is increased by the addition of superplasticizers. The superplasticizers help to increase the property of fluidity. Fluidity in SCC is not obtained due to moisture, unlike NCC. Here the chemical reactions happening at the micro level of SCC results in increasing fluidity. The figure-1 below shows the rheological properties of NCC and SCC. The variation is shown in terms of plastic viscosity and yield stress. When superplasticizers are added in lower volumes, the yield stress is lowered. This will bring a flowable concrete without segregation issues.
Fig.1: Rheological Properties of NCC and SCC(Newman & Choo, 2003; Wallevik, 2003:23)
2. Segregation
The Self-compacting concrete makes use of viscosity modifying agents (VMA) which creates problems when used in normal concrete. The VMA are pseudo polymers that helps in the reduction of aggregate segregation when compared to NCC. Other than the VMA agent, the viscosity of SCC is high as it has a low water to powder ratio compared to NCC. This characteristic of SCC will inhibit the segregation.3. Bleeding
Bleeding issues observed in SCC is less compared to normal concrete. This advantage of SCC is due to the lower water content and higher amount of fines. Higher binder content i.e. the cement, cement replacers and sand are causes of high fine content. A well-designed SCC mix can be properly handled without the issue of segregation and bleeding.4. Strength Development
The strength development is similar to that of normal concrete (As per European Guidelines). As per the recommendations, maturity testing is a good way of controlling the strength development in SCC.5. Plastic Settlement
The plastic settlement is formed in the concrete above the reinforcement in NCC structures. The use of viscosity modifying agent and increased powdered content in SCC helps to decrease the risk of plastic settlement cracks. Higher flowability and plastic settlement in SCC prevents the occurrence of plastic settlement that is common in NCC. The cracks are ultimately filled with the increase in flowability.6. Plastic Shrinkage
As the bleeding issues are less in SCC compared to normal concrete, the evaporation of moisture is controlled. Hence, proper curing of SCC is facilitated thus avoiding the chances of plastic shrinkage and resulted cracks.7. Creep
Cement content in SCC is in high volume that results in high creep when compared with normal concrete.Mix Composition of SCC and Normal Concrete
One of the major differences in materials used is the incorporation of superplasticizer in SCC mix which is ignored in normal concrete design. The SCC concrete can be developed with readily available materials. All other materials employed in SCC is similar to that of normal concrete but the difference is in the proportion added. The figure-3 below shows the variation of material constituents in self compacting concrete and normal cement concrete.
Fig.3: The mix composition of SCC v/s NCC; Image Courtesy: Okamura & Ouchi, 2003
Long Term Properties of SCC and Normal Concrete
The long-term properties will determine the structural durability of the concrete structure. Based on the studies conducted on SCC and NC in their hardened state, the following results were obtained:- The compressive strength developed for SCC and normal concrete for same water-binder ratio are similar.
- The value of split tensile strength is higher in SCC compared to normal concrete
- The modulus of elasticity of self compacting concrete is low compared when compared to normal concrete.
