The required load-carrying capacity of columns damaged due to earthquake can be regained by retrofitting the inclined columns. During earthquakes, the top and bottom parts of a column are most vulnerable to shear forces. If the forces are large, the ...
Earthquake Engineering
Home/Earthquake EngineeringDo you need to remove the ads? Become VIP Member
Category: Earthquake Engineering
Earthquake engineering deals with the study of earthquake forces and its effects on the buildings and structures.
Discy Latest Articles
How to Evaluate Liquefaction Potential of Soils in the Field?
The evaluation of the liquefaction potential of soils in seismic-prone region is essential for site selection, planning, and construction of structures. One can assess liquefaction potential through standard blasting tests, ground response analysis, laboratory tests, and expertise. The use of ...
How to Use Blasting for Deep Compaction of Soil?
Blasting is an economical compaction method that can be applied for various soil types such as granular, silt, clay, loess, etc. Not only is the technique highly effective in loose soil, but also capable of compacting granular soil down to ...
How to Fill Materials in Foundations, Trenches, Plinth, and Flooring? [PDF]
A filling refers to a quantity of earthen material such as murrum, soil, rock, aggregate, shingle, and sand that is placed and compacted in trenches, foundation, and under floors for the purpose of filling in a hole or depression. In this article, ...
Earthquake-Resistant Confined Masonry – Components, Difference, and Advantages
Confined masonry construction is a combination of two masonry, which consists of masonry walls (clay brick or concrete block units) and horizontal and vertical RC confining members built on all four sides of a masonry wall panel. Vertical members such ...
How to Replace Damaged Concrete Members in Structures?
The replacement of damaged concrete elements requires demolition and removal of existing structural elements and their substitution with new members. The demolition process is carried out after proper jacking is applied to relieve imposed loads on the damaged structural member. ...
Frequency of Earthquakes Worldwide
Frequency of earthquake is defined as how often a given earthquake with certain magnitude occurs. On average, earthquakes with a magnitude of 2 and smaller, which are called small earthquakes, happen several hundred times a day worldwide. However, major earthquakes ...
SuperAdobe – History, Construction, and Advantages
A super adobe structure is a man-made building made of sandbags (small or long) with the native material available in abundance and stacking or putting them in a layer that is reinforced with barbed wires. Superadobe is extensively used in ...