Isolated or single footings are structural elements which are designed to transmit and distribute loads of single columns to the soil without exceeding its bearing capacity, in addition to prevent excessive settlement, and provide adequate safety against sliding and overturning. ...
Foundation Engineering
Home/Geotechnical Engineering/Foundation Engineering/Page 6Do you need to remove the ads? Become VIP Member
Discy Latest Articles
Types of Isolated Footings
There are various types of isolated footings such as spread footing, stepped footing, sloped footing etc. They are usually square, rectangular or circular in shape. Each type of footing is selected based on the soil condition and configuration of imposed ...
Construction of Wall Footings – Materials, and Dimensions
Wall footings are pad or spread and strip footings which are used to support structural or nonstructural walls to transmit and distribute the loads to the soil in such a manner that the load-bearing capacity of the soil is not ...
What is Drilled Pier? Construction of Drilled Pier
A drilled pier is a deep foundation system that uses a large diameter concrete cylinder constructed by placing fresh concrete and reinforcing steel into a drilled shaft. It is also called as a caisson, drilled shaft, Cast-in-drilled-hole piles (CIDH piles) ...
Driven Precast Concrete Pile – Construction, Applications, and Advantages
Driven precast concrete piles are constructed by hammering the pile into the ground by pile driving plant. Piles of timber, prestressed concrete and steel are also used in this method.
Boring Methods for Soil Sampling for Soil Investigation
Boring methods are widely used for subsurface investigations to collect samples, in almost all types of soil, for visual inspection or laboratory testing. There are several boring techniques like auger boring, rotary drilling, wash boring, percussion drilling, auger drilling, and ...
What are the Serviceability Requirements of Foundation Structure?
Serviceability requirements are a set of conditions under which a foundation structure is considered to be useful. It is the second category of performance after the strength requirement. So, a foundation may be sound and perform well structurally, but it ...
Foundation Drain – Components, Working and Design
Foundation drain is an exterior drainage system installed on the outer face of the foundation wall and near the wall footing, covered with a layer of gravel, serving the purpose of draining out excess water seeping into the foundation. Components ...