In engineering drawing, engineering related objects like buildings, walls, electrical fittings, pipes, machines etc. are represented with specifications like size, shape, materials etc.
Do you need to remove the ads? Become VIP Member
Hello, Welcome to The Constructor
Hello, Welcome to The Constructor
Discy Latest Articles
Rate Analysis of Excavation in Earthwork -Calculate Cost of Excavation
Rate analysis of excavation in earthwork is the measure of quantity of excavation to be carried out, the cost of equipment, machineries and labors required for the same.
Concrete Formwork Removal Time, Specifications and Calculations
The removal of formwork also called as strike-off or stripping of formwork should be carried out only after the time when concrete has gained sufficient strength, atleast twice the stress to which the concrete may be subjected to when the ...
Types of Partition Walls for Homes and Offices
Partition walls are vertical dividers which are used to separate building internal spaces into rooms and circulation areas like corridors. Types of partition walls and their applications are discussed in the following sections. Types of Partition Walls Depending upon the ...
Civil Engineering Tips – Points to Remember for Civil Site Engineer
Civil engineer does many activities at construction site and there are certain works which are repetitive in nature. So, some points, tips and tricks which a civil engineer should remember for faster calculations as well as quick solutions to construction ...
Damp Proof Course (DPC) -Methods of DPC Installation in Construction [PDF]
What is DPC? The damp proof course (DPC) is generally applied at basement levels, which restricts the movement of moisture through walls and floors. The selection of materials for the damp proof course and its various methods of applications in ...
Reinforcement Detailing of Reinforced Concrete Slabs
Reinforcement detailing of a slab is done based on its support conditions. Slab may be supported on walls or beams or columns. Slab supported directly by columns are called flat slab. Slab supported on two sides and bending takes place ...
What are Different Tests for Concrete Quality Check?
Quality tests on concrete are performed as a part of quality control of concrete structures. Different quality tests on concrete such as compressive strength tests, slump tests, permeability tests etc.are used to assure the quality of the concrete that is supplied ...
Types of Joints in Concrete Construction
Joints in concrete construction are construction joints, expansion joints, contraction joints and isolation joints. Joints prevent cracking in concrete.
Surveying Principles and Methods in Civil Engineering
Surveying is used in civil engineering for construction site investigation to check levels and distances. Principles and methods of surveying are discussed.