Euler’s theory of column buckling is used to estimate the critical buckling load of column since the stress in the column remains elastic. The critical buckling load is the maximum load that a column can withstand when it is on ...
Discy Latest Articles
How Thick Should a Concrete Slab be?
Thickness of concrete slab depends on loads and size of the slab. In general, 6 inch (150mm) slab thickness is considered for residential and commercial buildings with reinforcement details as per design. Methods used for finding slab thickness varies for ...
Foundation Drain – Components, Working and Design
Foundation drain is an exterior drainage system installed on the outer face of the foundation wall and near the wall footing, covered with a layer of gravel, serving the purpose of draining out excess water seeping into the foundation. Components ...
Brick Ledge – Design and Construction Procedure
Brick ledge is a reinforced concrete bearing which supports the weight (100Kg per square meter or more) of finished materials such as brick, stone or other veneers acting directly on a footing or other foundation element. Generally, the brick or ...
How to Construct Concrete Stairs?
Construction of concrete stairs includes steps such as designing, preparing foundation, building formwork, placement of reinforcement steel bars, concreting, finishing and curing. Construction of concrete stairs is a difficult task that requires an engineer to study all the aspects and design ...
Types of Drawings used in Building Construction
Different types of drawings is used in construction such as architectural drawings, structural, electrical, plumbing and finishing drawings. These drawings provides layout plans and details for construction of each and every part of the building. Drawings plays an important role ...
Types of Design Loads for Masonry Lintel with Calculations
Various types of loads act on masonry lintels which are provided on wall openings. These loads must be identified & calculated for design masonry of lintels
Concrete Mix Design as per IS 10262-2009 – Procedure and Calculations
Procedure for concrete mix design calculation as per IS 10262-2009 based on strength and durability, workability, economy is discussed in this article.