🕑 Reading time: 1 minute
Contents:
What is Fineness Modulus of Coarse Aggregates?
Fineness modulus of coarse aggregates represents the average size of the particles in the coarse aggregate by an index number. It is calculated by performing sieve analysis with standard sieves. The cumulative percentage retained on each sieve is added and subtracted by 100 gives the value of fine aggregate. Higher the aggregate size higher the Fineness modulus hence fineness modulus of coarse aggregate is higher than fine aggregate. Coarse aggregate means the aggregate which is retained on 4.75mm sieve when it is sieved through 4.75mm. To find fineness modulus of coarse aggregate we need sieve sizes of 80mm, 40mm, 20mm, 10mm, 4.75mm, 2.36mm, 1.18mm, 0.6mm, 0.3mm and 0.15mm. Fineness modulus is the number at which the average size of particle is known when we counted from lower order sieve size to higher order sieve. So, in the calculation of coarse aggregate we need all sizes of sieves.![Fineness Modulus of Coarse Aggregates Fineness Modulus of Coarse Aggregates](https://test.theconstructor.org/wp-content/uploads/2016/07/fineness-modulus-of-coarse-aggregate.jpg)
Determination of Fineness Modulus of Coarse Aggregates
To find fineness modulus we need to perform sieve analysis and for that above mentioned sieve sizes, mechanical shaker and digital weigh scale are required.Sample preparation
Take a sample of coarse aggregate in pan and placed it in dry oven at a temperature of 100 – 110oC. After drying take the sample weight to nearest gram.Test Procedure for Fineness Modulus of Coarse Aggregates
Arrange the sieves in descending order and put the arrangement on mechanical shaker. It is suggested that, to know the exact value of fineness modulus for coarse aggregate, mechanical shaker will give better value than hand shaking because of more no. of sieves and heavy size particles. After proper sieving, record the sample weights retained on each sieve and find out the cumulative weight of retained particles as well as cumulative % retained on each sieve. Finally add all cumulative percentage values and divide the result with 100. Then we get the value of fineness modulus.![Standard Sieve for Sieve Analysis of Coarse Aggregates Standard Sieve for Sieve Analysis of Coarse Aggregates](https://test.theconstructor.org/wp-content/uploads/2016/07/standard-sieve-for-sieve-analysis.jpg)
Example for Fineness Modulus Calculation
Let us say dry weight of coarse aggregate = 5000g Values after sieve analysis areSieve size | Weight retained(g) | Cumulative weight retained (g) | Cumulative % retained (g) |
80mm | 0 | 0 | 0 |
40mm | 250 | 250 | 5 |
20mm | 1750 | 2000 | 40 |
10mm | 1600 | 3600 | 72 |
4.75mm | 1400 | 5000 | 100 |
2.36mm | 0 | 5000 | 100 |
1.18mm | 0 | 5000 | 100 |
0.6mm | 0 | 5000 | 100 |
0.3mm | 0 | 5000 | 100 |
0.15mm | 0 | 5000 | 100 |
Sum | = | 717 |
![Fineness Modulus for Coarse Aggregate Calculation Fineness Modulus for Coarse Aggregate Calculation](https://test.theconstructor.org/wp-content/uploads/2016/07/fineness-modulus-of-coarse-aggregate-calculation.jpg)
Limits of Fineness Modulus
Fineness modulus of coarse aggregate varies from 5.5 to 8.0. And for all in aggregates or combined aggregates fineness modulus varies from 3.5 to 6.5. Range of fineness modulus for aggregate of different maximum sized aggregates is given below.Maximum size of coarse aggregate | Fineness modulus range |
20mm | 6.0 – 6.9 |
40mm | 6.9 – 7.5 |
75mm | 7.5 – 8.0 |
150mm | 8.0 – 8.5 |
Read More:
Fineness Modulus of Sand and its Calculation
Fineness Modulus Method of Concrete Mix Design Recommended Concrete Mixes for Various Types of Construction Determine Particle Size Distribution of Soil by Sieving