How size of aggregate affect on strength of concrete?
Do you need to remove the ads? Become VIP Member
Join TheConstructor to ask questions, answer questions, write articles, and connect with other people. When you join you get additional benefits.
Log in to TheConstructor to ask questions, answer people’s questions, write articles & connect with other people. When you join you get additional benefits.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
How size of aggregate affect on strength of concrete?
Structural Engineer
The tensile strength of the concrete is severely affected by increasing the size of the aggregate. On increasing the maximum grain size to 120–180 mm, the reduction in tensile strength is 30–50% as compared with concretes with maximum aggregate size 20 mm. There is also a reduction in the elongation limit
Tips_and_tricks
The size of the aggregate plays a crucial role in the strength of the concrete. Normally, small-sized aggregates are preferred. Larger sized aggregate reduces the strength of the concrete. This is because of the Interfacial Transition Zone (ITZ).
The interfacial transition zone is the zone that is formed on the surface of the aggregates. When concrete is mixed, the water present in the mix coats itself on the surface of the aggregates. This thin film results in a high water-cement ratio in the vicinity of the aggregates.
Owing to the high w/c ratio, during hydration reaction, a rather porous network is formed, resulting in a weaker section surrounding the aggregates. However, as the hydration reaction proceeds, the second generation hydration gels are produced, making the zone denser but still comparatively weaker than the rest of the concrete.
This happens in all sized aggregates. But as the size of the aggregate increases, the surface area of the aggregate also increases. As a result, the ITZ increases, making the concrete weak.