The types of loads acting on structures for buildings and other structures can be broadly classified as vertical loads, horizontal loads and longitudinal loads.
Discy Latest Articles
Approximate Lateral Load Analysis by Portal Method
The portal method is an approximate analysis used for analyzing building frames subjected to lateral loading such as the one shown in Fig.1. This method is more appropriate for low rise buildings with uniform framing. Portal Method of Analysis Assumptions ...
BEHAVIOUR OF TENSION MEMBERS UNDER LOADS
Behaviour of tension members under the action of loads for tension ties and is discussed below: Behaviour of Tension Tie: The tie is the simplest type of member in tension. When a tensile load is applied on one side of ...
Moments of Inertia of Areas
First moment Forces are distributed continuously over an area on which they act, it is often necessary to calculate the moment of theses forces about an axis Second moment The intensity of the force (pressure or stress) is proportional to ...
Statics of Bending: Shear and Bending Moment Diagrams
Beams are long and slender structural elements, differing from truss elements in that they are called on to support transverse as well as axial loads. Their attachment points can also be more complicated than those of truss elements: they may ...
Steel Concrete Composite Columns- Analysis and Design
A steel-concrete composite column is a compression member, comprising either a concrete encased hot-rolled steel section or a concrete filled tubular section of hot-rolled steel and is generally used as a load-bearing member in a composite framed structure. Typical cross-sections ...
Stiffness Method of Structural Analysis
The stiffness method of analysis is the basis of all commercial structural analysis programs. The focus of this tutorial is development of these equations that only take into account bending deformations, i.e., ignore axial member deformations. Within the assumptions, the ...
Seismic Analysis of Liquid-Storage Tanks
Large-capacity ground-supported cylindrical tanks are used to store a variety of liquids, e.g. water for drinking and fire fighting, petroleum, chemicals,and liquefied natural gas. Satisfactory performance of tanks during strong ground shaking is crucial for modern facilities. Tanks that were ...