Reinforced concrete slab design and detailing guidelines for depth of slab, loads on slab, reinforcement guide for one-way and two-way slabs as per IS 456:2000 have been tried to present here. Following are the RCC Slab Design and Detailing guidelines: ...
Discy Latest Articles
Reinforcement Detailing of Concrete Slab Openings (Cutouts)
Details of openings in reinforced concrete slab are required to be provided in buildings to provide way for lifts, or cables, ducts or other instrument to pass through one floor to other floors, mainly in the case of industrial buildings.
Bubble Deck Slab – Types, Material Specification, Installation, and Advantages
Bubble deck slab is a hollow, flat slab that spans in two directions, in which plastic balls are incorporated to replace, and therefore eliminate the concrete in the middle of a conventional slab which does not contribute to its structural ...
Reinforced Concrete Slab Design Guidelines
Basics of Reinforced Concrete Slab Design Slabs are generally designed on the assumption that they consists of a number of beams of breadth ‘one meter’. 1. Effective Span of Slab The effective span of a simply supported slab shall be ...
Yield Line Theory For Slab Design – Assumptions, Methods of Analysis
What is Yield Line Theory? The yield line theory of analysis is a factored or ultimate load method of analysis. The yield line theory is conducted based on the bending moment of the structural element at its collapse state. The ...
Detailing of Transverse Reinforcement
The detailing of reinforcement is as important as the analysis and design of any RCC members. Specially it is true in the design of structures against the SEISMIC forces. The most and very important aspect of detailing is well documented ...
SLABJACKING
The purpose of slab jacking is to raise a slab in place permanently, prevent impact loading, correct faulty drainage, and prevent pumping at transverse joints by injection of a grout under the slab. The grout fills voids under the slab, ...
Reinforced Concrete Slab Casting- Work Procedure
The construction joint shall be pre decided and fixed prior to start of the concreting. It is planned to have two construction joints for main building as decided. In case of major break down of the Batching plant, the additional ...