Most of the reinforced concrete structures won’t be provided with full length reinforced bars. The manufacture and transportation of long bars are difficult, which limit the use of full length reinforced bars. The method used to join the reinforcement bars, ...
Discy Latest Articles
Balanced, Under-Reinforced and Over-Reinforced Beam Sections
Reinforced concrete beams are classified as balanced, under-reinforced and over-reinforced based on its reinforcement percentage. Details of these beam sections are discussed.
Typical Joint Detailing of Steel Hollow Sections -Types of Joints
Typical Joint Detailing of Steel Hollow Sections Detailing of joints in steel structure is as much important as detailing of main structural members. Ultimately loads from structures are transferred to different structural members through joints. So, a good detailing of ...
DESIGN OF FOOTINGS – IS-456 RECOMMENDATIONS
DESIGN OF FOOTINGS – IS-456 RECOMMENDATIONS: GENERAL 1. In sloped or stepped footings, the effective cross – section in compression shall be limited by the area above the neutral plane, and the angle of slope or depth and location of ...
Minimum Thickness of Concrete Slab, Beam, Column, Foundation
Minimum thickness of concrete slab, beam, column, foundation and other structural members is selected to meet the design requirements as per standard codes. Minimum thickness of concrete structural elements based on ACI 318-14, IRC 2009, IS 456 2000, and UBC ...
BLAST RESISTANT DESIGN OF STRUCTURES
Reinforced concrete can provide substantial protection from even extreme blast loading. The relatively large mass of concrete elements provides an inherent resistance to impulsive loads. Structural design considerations include sizing members to provide an expected degree of deformation and associated ...
Calculate Earthquake Forces on Buildings and Structures
Earthquake resistant design requires calculation of earthquake forces on buildings and structures. The guide to earthquake resistant design of building and structures are given by IS 1893:2002 in India.
GANTRY GIRDER DESIGN BASIS
Overhead travelling cranes are used in factories and workshops to lift heavy materials, equipments, etc and to carry them from one place to the other. These cranes are either hand operated or electrically operated. The crane consists of a bridge ...