The design of an axially loaded reinforced concrete (RC) short column is quite simple and straightforward. It is governed by the strength of materials and the cross-section of the member. If vertical axial loads act on the center of gravity ...
Discy Latest Articles
How to Design Reinforced Concrete Beam for Shear? Example Included
Shear design of reinforced concrete (RC) beam involves the determination of spacing between stirrups. Shear is a word used for forces that work perpendicular to the longitudinal axis of RC beam. Commonly, shear forces are maximum at supports of beams ...
How to Design One-way Slab as per ACI 318-19? | Example Included
One-way slab is a type of concrete slab in which loads are transferred in one direction to the supporting beams and columns. Therefore, the bending occurs in only one direction. The design of one-way slab is simple and can be ...
Tips and Rules for Design of Reinforced Concrete Columns
The design of reinforced concrete (RC) column is carried out by following certain procedures. However, some specific rules and requirements need to be met. The conditions are commonly related to reinforcement ratio, size of rebars, spacing of steel bars, size ...
Design Procedure of Reinforced Concrete T-beam with Example
T-beams are formed when reinforced concrete floor slabs, roofs, and decks are cast monolithically with their supporting beams. Generally, formworks are placed for the bottom and sides of the beams and soffit of slabs. Bent up bars and stirrups of ...
How to Estimate Preliminary Sizes of Concrete Elements?
Estimation of preliminary sizes of concrete elements is crucial for the design of structural concrete elements. Initially, the designer has to determine the loads to proceed with the design works that involve calculating the dimensions of concrete members and required ...
Tips to Avoid Reinforcement and Embedment Congestion in Concrete Members
Designers should consider possible congestions in reinforced concrete members while designing concrete structures. They should follow specifications of applicable codes to prevent congestions. Sometimes, one of the options to avoid congestion is by increasing the width of the concrete members ...
Thumb Rules and Specifications for Design of Reinforced Concrete Beam
The design of a reinforced concrete beam is achieved through a trial and error method. However, design codes, certain thumb rules, and past experiences can significantly reduce the lengthy design process. Initially, certain aspects of design, like geometry and self-weight, ...