Which are the best steps for checking of reinforcement in RCC structure?
Steel have higher strength than concrete.
Steel have higher strength than concrete.
See lessDiscy Latest Questions
Which structure has higher strength concrete or steel?
Where is the T beam used in concrete structure?
-
Here, the designers gets a natural advantage of using T or L beams in any structure with slab beam construction. It is mainly used in frame type structure. A T-beam or Tee-beam is used in a construction process which is a load bearing structure of a reinforced concrete, wood or metal having T-shapedRead more
Here, the designers gets a natural advantage of using T or L beams in any structure with slab beam construction. It is mainly used in frame type structure. A T-beam or Tee-beam is used in a construction process which is a load bearing structure of a reinforced concrete, wood or metal having T-shaped cross-section. The vertical section (web) of the beam below the compression flange serves to resist shear stress and to provide greater separation for the coupled forces of bending.
See less
Therefore, in any situation of beam-slab we can use T-beam.
What is deadmen or tell-tales in excavation?
-
Basically in construction, deadmen refers to a heavy weight, typically a mass concrete block used to provide support or resistance to a load. These blocks are usually embedded firmly in soil, however some blocks may simply rest on the ground surface. A deadmen also referred to as a jacking lug.
Basically in construction, deadmen refers to a heavy weight, typically a mass concrete block used to provide support or resistance to a load. These blocks are usually embedded firmly in soil, however some blocks may simply rest on the ground surface.
A deadmen also referred to as a jacking lug.
See less
What is the rule for deduction in the measurement of plastering work?
-
Plastering deductions as per IS code 1200. For opening of size 0.5 m2 to 3 m2 area, deduction is made on one face of the wall. For openings of size above 3 m2, deduction is made on both faces of the wall, but the area of sill, jamb and soffits of the opening is added.
Plastering deductions as per IS code 1200. For opening of size 0.5 m2 to 3 m2 area, deduction is made on one face of the wall. For openings of size above 3 m2, deduction is made on both faces of the wall, but the area of sill, jamb and soffits of the opening is added.
See less
What are the properties and significance of Fire Clay?
-
Fire clay :- Fire clay is a range of refractory clays used in the manufacture of ceramics, especially fire brick. The United States Environmental Protection Agency defines fire clay very generally as a "mineral aggregate composed of hydrous silicates of aluminium (Al2O3·2SiO2·2H2O) with or without fRead more
Fire clay :-
Fire clay is a range of refractory clays used in the manufacture of ceramics, especially fire brick. The United States Environmental Protection Agency defines fire clay very generally as a “mineral aggregate composed of hydrous silicates of aluminium (Al2O3·2SiO2·2H2O) with or without free silica.”
Properties of fire clay :-
Fire clay is resistant to high temperatures, having fusion points higher than 1,600 °C (2,910 °F); therefore it is suitable for lining furnaces, as fire brick, and for manufacture of utensils used in the metalworking industries, such as crucibles, saggars, retorts and glassware. Because of its stability during firing in the kiln, it can be used to make complex items of pottery such as pipes and sanitary ware.
See less
What is Nainital Corrugated Sheets?
-
Corrugated Sheet: It is composed of hot-dip galvanised mild steel and cold rolled for producing a linear corrugated pattern. More amount of iron is present in it. Actually, corrugation increases the bending strength of the sheet when the direction is perpendicular to the corrugations. Steel must beRead more
Corrugated Sheet:
- It is composed of hot-dip galvanised mild steel and cold rolled for producing a linear corrugated pattern. More amount of iron is present in it.
- Actually, corrugation increases the bending strength of the sheet when the direction is perpendicular to the corrugations.
- Steel must be stretched to bend in the direction of perpendicular to the corrugations.
- Usually, every sheet is already manufactured linger in its strong direction.
Applications of corrugated sheets are given below:
- In Architectural and construction field
- In the packaging sector
- In the Printing sector
- In the medical field
Thanking You.
See less - It is composed of hot-dip galvanised mild steel and cold rolled for producing a linear corrugated pattern. More amount of iron is present in it.
What is Land Jantri in government departments of India?
-
Land jantri is the legal document which is released by state government.
Land jantri is the legal document which is released by state government.
See less
dbnalawade
Very important question before providing clearances to pour concrete. I would follow following steps. Ensure Contractor has bar bending schedule and approved drawing. Ensure reinforcement used are approved grade and test certificates are in place. Check diameter of rebar ( reinforcement) Check spacRead more
Very important question before providing clearances to pour concrete. I would follow following steps.
Hope this helps.
See less