Interview Questions

Home/Interview Questions

Do you need to remove the ads? Become VIP Member

Discy Latest Questions

Asked: In:
aviratdhodare
aviratdhodare

aviratdhodare

View Profile

What is the best solution for replacing existing lights in order to improve the lighting efficiency of a highway?

  1. Komal Bhandakkar

    Komal Bhandakkar

    View Profile
    Komal Bhandakkar AUTHOR
    This answer was edited.

    Using the following ways, Usage of maximum energy-efficient lighting Usage of a smarter lighting system. Sodium lamp replaced by LED's in a first way Use artificial light as per requirement in the second way Thanks.

    Using the following ways,

    1. Usage of maximum energy-efficient lighting
    2. Usage of a smarter lighting system.
    1. Sodium lamp replaced by LED’s in a first way
    2. Use artificial light as per requirement in the second way

    Thanks.

    See less
    • 0
Asked: In:
vivek gami
vivek gami

vivek gami

View Profile
User

What is full form of SP in Indian standard code?

  1. AdityaBhandakkar

    AdityaBhandakkar

    View Profile
    AdityaBhandakkar User
    This answer was edited.

    hi, SP - Special Publication According to BIS, it is a special piblication of IS(Indian Standard). IS :456:2000 (PRACTICE CODE FOR PLAIN AND REINFORCED) SP-34 (HANDBOOK ON CONCRETE AND REINFORCEMENT DETAILING)  

    hi, SP – Special Publication According to BIS, it is a special piblication of IS(Indian Standard).

    1. IS :456:2000 (PRACTICE CODE FOR PLAIN AND REINFORCED)
    2. SP-34 (HANDBOOK ON CONCRETE AND REINFORCEMENT DETAILING)

     

    See less
    • 36
Asked: In:
Vivek Patel
Vivek Patel

Vivek Patel

View Profile
User

What is best answer of “Introduce Yourself”?

  1. nikeetasharma

    nikeetasharma

    View Profile
    nikeetasharma Guru

    Introduction differs from person to person. Everybody have their own way to introduce themself. If you are going for an interview it is most important to introduce yourself in correct manner because we all know that first impression is last impression. So, here are some tips which you can use for inRead more

    Introduction differs from person to person. Everybody have their own way to introduce themself. If you are going for an interview it is most important to introduce yourself in correct manner because we all know that first impression is last impression. So, here are some tips which you can use for introducing yourself in an interview or anywhere;

    • Start with a smile and make a greet to the person opposite of you.
    • Use a casual and friendly tone.
    • Give your education details in short.
    • Share about the reason you are there for.
    • Ellaborate on your experiences and achievements.
    • Give a short explanation about your project.
    • Tell about your interests and hobbies.
    • And conclude by saying THANKS with a SMILE.
    See less
    • 33
Asked: In:
Komal Bhandakkar
Komal Bhandakkar

Komal Bhandakkar

View Profile
AUTHOR

What is the difference between map and plan?

  1. Srinivas Anumala

    Srinivas Anumala

    View Profile
    Srinivas Anumala VIP

    Map is a drawing showing the geographical features, facilities, roads, places, water bodies etc.. (natural & built) preferably covering large areas of land & waters. Plan is a drawing showing the proposed construction / development indicating the dimensions / measurements for further implemeRead more

    Map is a drawing showing the geographical features, facilities, roads, places, water bodies etc.. (natural & built) preferably covering large areas of land & waters.
    Plan is a drawing showing the proposed construction / development indicating the dimensions / measurements for further implementation.

    See less
    • 3
Asked: In:
Komal Bhandakkar
Komal Bhandakkar

Komal Bhandakkar

View Profile
AUTHOR

What is the reason behind the initial setting time of cement should not be less that 30min.?

  1. Komal Bhandakkar

    Komal Bhandakkar

    View Profile
    Komal Bhandakkar AUTHOR
    This answer was edited.
    What is the reason behind the initial setting time of cement should not be less that 30min.?

    Initial setting time of various types of cement: The value of the initial setting time is different for a different type of cement. The initial setting time of Quick setting cement is only 5 minute. The initial setting time of low heat cement is 60 minutes But usually, another type of cement has 30mRead more

    Initial setting time of various types of cement:

    • The value of the initial setting time is different for a different type of cement.
    • The initial setting time of Quick setting cement is only 5 minute.
    • The initial setting time of low heat cement is 60 minutes
    • But usually, another type of cement has 30minutes is the value of initial setting time.

    Please refer the above image for knowing the values of initial setting time and final setting time for various types of cement.

    Thank you.

    See less
    • 30
Asked: In:
aviratdhodare
aviratdhodare

aviratdhodare

View Profile

How would you approach a ground investigation for a building structure?

  1. nikeetasharma

    nikeetasharma

    View Profile
    nikeetasharma Guru

    Some of the ground investigation which are done before building construction are :- - Desk study/preliminary risk assessments - Trial pitting and trenching - Window sampling and dynamic probe testing - Insitu testing - Cable percussive boreholes

    Some of the ground investigation which are done before building construction are :-
    – Desk study/preliminary risk assessments
    – Trial pitting and trenching
    – Window sampling and dynamic probe testing
    – Insitu testing
    – Cable percussive boreholes

    See less
    • 0
Asked: In:
Komal Bhandakkar
Komal Bhandakkar

Komal Bhandakkar

View Profile
AUTHOR

What is Golden Ratio? How can we find out the Golden Ratio of any rectangular shaped body?

  1. aviratdhodare

    aviratdhodare

    View Profile
    aviratdhodare

    The Golden Ratio is an irrational number with never-ending infinite numbers of digits, 1.618033988749895..., which are highly confusing and misleading. It is a linear number and represents only two dimensions of the object. Drawing It Here is one way to draw a rectangle with the Golden Ratio: Draw aRead more

    The Golden Ratio is an irrational number with never-ending infinite numbers of digits, 1.618033988749895…, which are highly confusing and misleading. It is a linear number and represents only two dimensions of the object.

    Drawing It

    Here is one way to draw a rectangle with the Golden Ratio:

    • Draw a square (of size “1”)
    • Place a dot half way along one side
    • Draw a line from that point to an opposite corner (it will be √5/2 in length)
    • Turn that line so that it runs along the square’s side

    Then you can extend the square to be a rectangle with the Golden Ratio.

    See less
    • 12
Asked: In:
Jigar Chaudhari
Jigar Chaudhari

Jigar Chaudhari

View Profile
User

Why gravity dam is called a gravity dam? Is there any reason behind the name?  

  1. Kuldeep Singh

    Kuldeep Singh

    View Profile
    Kuldeep Singh Learner

    Gravity dam, as the name suggests, is a dam that resists the water upstream by the use of its weight itself, unlike earthen dams and embankment dams that employ the shear strength of the soil. The dam is designed so that the resultant of the water pressure, earth pressure, and all other forces are aRead more

    Gravity dam, as the name suggests, is a dam that resists the water upstream by the use of its weight itself, unlike earthen dams and embankment dams that employ the shear strength of the soil.

    The dam is designed so that the resultant of the water pressure, earth pressure, and all other forces are aligned and balanced by the weight of the dam itself.

    They are generally made of Roller compacted concrete.

    See less
    • 0
Load More Questions