Continuous beams and one-ways slabs are statically indeterminate structures which i.e they cannot be analyzed using three equations of equilibrium developed to solve unknown moments and reactions of determinate members. That is why several methods such as slope deflection method, ...
Beam Design
Home/Structural Engineering/Beam DesignDo you need to remove the ads? Become VIP Member
Discy Latest Articles
How to Design Reinforced Concrete Beam for Shear? Example Included
Shear design of reinforced concrete (RC) beam involves the determination of spacing between stirrups. Shear is a word used for forces that work perpendicular to the longitudinal axis of RC beam. Commonly, shear forces are maximum at supports of beams ...
Design Procedure of Reinforced Concrete T-beam with Example
T-beams are formed when reinforced concrete floor slabs, roofs, and decks are cast monolithically with their supporting beams. Generally, formworks are placed for the bottom and sides of the beams and soffit of slabs. Bent up bars and stirrups of ...
How to Estimate Preliminary Sizes of Concrete Elements?
Estimation of preliminary sizes of concrete elements is crucial for the design of structural concrete elements. Initially, the designer has to determine the loads to proceed with the design works that involve calculating the dimensions of concrete members and required ...
Thumb Rules and Specifications for Design of Reinforced Concrete Beam
The design of a reinforced concrete beam is achieved through a trial and error method. However, design codes, certain thumb rules, and past experiences can significantly reduce the lengthy design process. Initially, certain aspects of design, like geometry and self-weight, ...
Design of Doubly Reinforced Concrete Rectangular Beams with Example
The doubly reinforced concrete beam design may be required when a beam’s cross-section is limited because of architectural or other considerations. As a result, the concrete cannot develop the compression force required to resist the given bending moment. In that ...
Understanding the Transfer of Loads from Slab to Beams
The transfer of loads from a slab to beams is controlled by the slab’s geometrical dimension and the direction of reinforcements. The load of the slab, including self-weight, live load, and imposed dead load, are distributed over the beams on ...
What are Load Factors and Strength Reduction Factors in Concrete Strength Design Method?
In the strength design method, the safety of concrete structures is ensured by using load factors and strength reduction factors. The load factors are used to increase the amount of applied load on a structure to account for possible load ...