Construction

What does FLOOR AREA RATIO mean:

FAR is a technical term used in Urban Planning that determines the total built-up space of the building on a plot of land. Generally, the FAR of the City or the Area is fixed by the government, based on various parameters like infrastructure, population or population growth. These you will understand once you are going through this issue.

So by Definition FLOOR AREA RATIO (FAR) is the ratio of BUILDING’S TOTAL COVERED AREA to THE SIZE OF THE PLOT on which it is built.

BUILDING’S TOTAL COVERED AREA is the Gross Floor Area.

Formula for FAR

FAR = TOTAL COVERED AREA (ALL FLOORS)/ AREA OF PLOT.

For e.f. If there are 4 Floors and each Floor is of 5000 Sq feet, then the Total Covered Area of all the Floors is 20000 Sq Feet and the size of the plot is 10000 Sq Feet, then FAR = 20000/10000 = 2. In some areas it is mentioned as % i,e, 200% or somewhere it is mentioned simply 200. So if it is 200 then it means the FAR of the City or Area is 2, meaning one is authorized to build up the covered area 2 times to that of the plot area.

But Generally FAR is fixed by the government, for particular City or Area and the FAR can be used to calculate the Total Covered Area that is built on a plot of land.

NOTE: There is one more term FLOOR SPACE INDEX i.e. FSI. The meaning of FAR and FSI is the same. There is a difference of only denoting these two. FAR is always mentioned in percentage. For e.g. the FAR of any City / Area is 200% then the FSI of the same City / Area will be denoted as 2.0.

Let us understand with the help of an illustration as in the image below:

For e.g. the total Plot Area is 10000 Sq feet

CASE 1: If FAR of a place is 0.5, then the total area to be built up is allowed only 5000 sq feet.

OPTION A: One can construct in 50% of the plot area, only one floor of 5000 sq feet. So FAR = 5000/10000=0.5

OPTION B : One can construct in 25% 2 Stories of 2500 sq feet of each. So FAR = (2X2500)/10000=5000/10000 = 0.5

CASE 2: If FAR of a place is 1.0, then the total area to be built up is allowed only 10000 sq feet.

OPTION A: One can construct in 100% of the plot area, only one floor of 10000 sq feet. So FAR = 10000/10000=1.0

OPTION B : One can construct in 50% of the plot area ,2 Stories floor of 5000 sq feet. So FAR = (5000 X 2) /10000 = 10000/10000=1.0

OPTION C : One can construct in 25% 4 stories of 2500 sq feet of each. So FAR = (2500 X 4) /10000=10000/10000 = 1.0

CASE 3: If FAR of a place is 2.0, then the total area to be built up is allowed only 20000 sq feet.

OPTION A : One can construct in 100% of the plot area ,2 Stories of 10000 sq feet each. So FAR = (10000 X 2 )/10000 = 20000/10000=2.0

OPTION B : One can construct in 50% of the plot area ,4 Stories floor of 5000 sq feet. So FAR = (5000 X 4) /10000 = 20000/10000=2.0

OPTION C : One can construct in 25% 8 stories of 2500 sq feet of each. So FAR = (2500 X 8) /10000=20000/10000 = 1.0

So if you know the FAR, you can calculate the total covered area that can be built on the plot.

How much open area you have to leave or how much area can be built up depends on the zoning and planning regulations also. For e.g. how much area to be left for:

• Setback.
• Parking
• Ground Coverage or Maximum Ground Coverage.
• Height Restrictions

FACTORS URBAN DEVELOPMENT AUTHORITY CONSIDER WHILE DECIDING FAR:

• The current population of the City / Area: When the population of the City / Area is high, the FAR is also high, it means the government is intending for Vertical Development as compared to the spread-out development,
• Population Growth: If the population growth rate is high, then also the FAR of the City / Area is high
• Infrastructure: Infrastructure also plays a key role while deciding the FAR of the City / Area. If Infrastructure is low then FAR will be kept low otherwise there will be pressure on infrastructural facilities viz, water, power supply, transport etc. If Infrastructure of the City / Area is already high and developed by the government relative to population density, then FAR can be kept at a higher level by the Authorities.

Note: If in the City / Area, the infrastructure is low but the population is growing at a faster rate, then the government has to increase the infrastructure and FAR has to be kept higher to accommodate the high growing population.

So when FAR increases the Population Density of the City / Area increases.

IMPACT OF HIGH FAR:

• Higher Population Density
• Stress on Infrastructure
• Better Profitability for Developers
• High Land Value
• Better Walkability

IMPACT OF LOW FAR:

• Lower Population Density.
• Better Per Capita Infrastructure
• Reduced Profitability for the Developers.
• Low Land Prices.
• Long Travel Distances

Architects make plans for new construction projects, modifications, and redevelopments. They utilize their expert development information and significant level drawing skills to design structures that are functional, safe, sustainable, and aesthetically pleasing. Architects remain included all through the development procedure, adjusting their arrangements as indicated by spending requirements, natural elements, or customer needs. In that capacity, they work as a feature of a general undertaking configuration group, working intimately with a scope of development experts from amount assessors to building administration engineers.

Architectural technicians are answerable for any technical specifications of a specific part of the architectural project. They create and design segments of the task with great detail, indicating definite estimations. They are typically entrusted with breaking down the usefulness of the project, just as assessing what potential mistakes could happen. Because of the precision required from the drafts and portrays, the technicians are appointed, they typically should draw a few representations of a similar segment with shifting edges and perspectives for the construction group.